1999-2009 [Subscribe to Daily Digest] |
[Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Fasten Belts light Posted by B Millar [Email] (#1109) [Profile/Gallery] (more from B Millar) on Mon, 14 Apr 2008 11:54:02 In Reply to: Fasten Belts light, AsherSPG, Mon, 14 Apr 2008 11:34:14 Members do not see ads below this line. - Help Keep This Site Online - Signup |
It's very simple actually. Here's something I wrote a while back:
"Shove a flathead screw driver into where the tabs are on the clear plastic dome-light cover. You should just have to do one side and then the thing will fall right out. This exposes a torx screw. Use the set in the trunk to take that out and then the whole plastic trim just comes right down. There aren't even any annoying plastic clips to deal with. I let it dangle by the temp sensor and microphone wires while I played around with the bulbs. I couldn't get my fingers in so I got a pair of really thin needle-nosed pliers. I had some really thin (think crazy-straw-width) rubber tubing hanging around so I cut a couple 3/4" pieces of that and jammed them onto the plier tongs. The bulbs pulled right out with those."
I got my bulbs at the dealer. I looked all over the place to order them online but the only places that actually had the bulbs would only send me them in bulk (at least 10). At almost $3 a bulb that was going to be $40 with shipping. It's not worth the hassle. Good luck!
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.