1999-2009 [Subscribe to Daily Digest] |
-Update-
I connected the loose hose back to the heater bypass valve but it slipped off again after few days and a hard acceleration. I checked again and noticed the inlet pipe actually sheared off so I have been re-connecting the hose to a broken pipe. It is obviously to me now after I compared it to a picture of a good one. No wonder it came off again. I'll have to get a new one now. Also I found the bypass valve is not connected to a vacuum line on the top anymore. Is that why the pipe sheared off? Any way I found a loose vacuum line at the other end (The bottom hose in the photo. The top one has been identified previously as the TB line) but I am not sure if it is for the heater bypass valve or something else. Would you please confirm or point it out where the other end of this vacuum line should go? Thanks in advance.
-David
posted by 108.45.15...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.