Re: agree on tensioner pulley bearing, more on diy - Saab 900 Bulletin Board - Saabnet.com
The banner above is an advertisment - if it asks you to download software, please ignore.
Site News -
[General |
Members |
C900 |
9000 |
NG900 & OG93 |
93 |
95 |
NG95 |
99 |
Sonett |
Vintage Models |
Clubs |
Other Cars |
FAQs |
Gifts |
Member Photo Galleries |
Member Directory |
Classifieds |
Manuals |
*Buddy Registry |
*Mileage Registry |
Polls |
What's New |
Raffle |
Photo of the Month |
Sponsors]
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: agree on tensioner pulley bearing, more on diy
Posted by JohnK (more from JohnK) on Mon, 31 Mar 2003 10:49:19
In Reply to: What about the tensioner pulley bearing?, Chaz, Sun, 30 Mar 2003 12:18:33
Members do not see ads below this line. - Help Keep This Site Online - Signup
Noise description sounds like tensioner pulley, but could be compressor. You can hear the pulley noise with a long screwdriver makeshift stethoscope touched to the pulley mount shaft. Be extremely careful with moving belts. If you are nervous about this approach, just loosen A/C belt and pop it off the pulley. If idler pulley is shot, you can feel the play by hand.
For AC rebuild, experts recommend a new expansion valve and it is mandatory to replace the receiver dryer, because the system has been exposed to the air. Sobstory has all this stuff and Jim will make sure you get the right parts and orings.
If you are diying, be very careful when you remove the hoses from the evaporator at the firewall. The pipes are soft copper and the support nut needs to be well supported with an extra wrench when you try to loosen the hose fittings. Have the wrench handles very close, so you can squeeze them together to crack the fitting without moving the pipe. If the wrench handles are 90 degees apart, it will be very hard to avoid twisting the copper pipe. Hose connections to receiver dryer also need to be well supported when tightening and it is easy to not fully tighten these fittings. You will feel a firm stop when they are snug. Finally, make sure there is enough oil in system when refilling. Bentley has exact quantity...7 ozs for emapty system if i remember.
posted by 216.75.9...
Posts in this Thread:
Members do not see ads below this line. - Help Keep This Site Online - Signup
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
StateOfNine.com
|
SaabClub.com
|
Jak Stoll Performance
|
M Car Covers
|
Ad Available
|
Random Saabnet.com Member Gallery Photos (Click Image)
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | Run Club Menlo Park | ScreenBot
Site Members do not see red text instructions, bottom of the page anchor ads, or box ads.
Click here to see all
the Site Membership Benefits!