1979-1993 & 94 Conv [Subscribe to Daily Digest] |
 | [Main C900 Bulletin Board | BBFAQ |
Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: cool! Posted by PaulS [Email]  (#676) [Profile/Gallery]
(more from PaulS) on Wed, 22 Sep 2010 18:55:30
In Reply to: cool!, Siegfried, Tue, 21 Sep 2010 11:51:26 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I did not take any photos and it is not easy for me to scan my Plymouth shop manual.
Here are two links that may help (I searched for rebuild saginaw power steering pump). These both seem accurate to me.
http://www.corvette-restoration.com/restoration/motor_and_transmission/060813_power_steering_pump_rebuild.htm
http://www.fullsizebronco.com/forum/showthread.php?t=19310
One thing I forgot to mention: The rebuild kits are "universal" and include more seals that you will need. It is hard to know which seal to use when there are two that look almost the same. For example I had two seals that were each about one inch in diameter. One was a snug fit around the circumference and maybe a little short. There other was a wee bit too small in circumference but a bit taller - between 1/32 and 1/16 of an inch taller than the hole (so it stood proud a little). I picked the too tall one thinking it would compress a little bit and make a better seal. I am not sure if this was right. So far (two months) it is not leaking but time will tell.
I believe the kit I used was Edelmann part# 7910 but I think all the kits are about the same.
posted by 173.49.158...
, Mon, 20 Sep 2010 19:15:13
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
