1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Crankshaft position sensor location Posted by Charles R Wirt [Email] (#1425) [Profile/Gallery] (more from Charles R Wirt) on Mon, 16 Mar 2020 17:40:18 In Reply to: Re: Crankshaft position sensor location, Name Left Blank, Mon, 16 Mar 2020 13:13:45 Members do not see ads below this line. - Help Keep This Site Online - Signup |
IRT 8-valve engines am not sure but expect on the oil pump casing at the timing end of the crankshaft triggered by a gap in a steel disc and mounted to the car's lower left. It will be mounted by 2 TORX-head screws, likely T-15, 17 or 20. Soak it well & long in Liquid wrench or similar, dry & clean very well the sockets to avoid the driver jumping or stripping the head. When turning get into position to hold the driver solidly into the screw heads. If you strip the heads you got trouble. The wires run up the intake side of the cylinder block to a connector. The casing is held together by 2 T-10's, clamp well, be careful as above. I have seen several sensors on eBay off & on.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.