1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Saab tool for clutch repair? Posted by Goblin [Email] (#2224) [Profile/Gallery] (more from Goblin) on Sat, 23 Oct 2021 17:03:05 In Reply to: Re: Saab tool for clutch repair?, 2nd Owner [Profile/Gallery] , Sat, 23 Oct 2021 16:46:08 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Yeah if you loosen up the clutch pressure plate, you can stick a nut behind each little arm and then tighten the pressure plate back down and that will depress the clutch so you can put the clutch ring in there. Then you can take the nuts out and then take the bolts out and remove the clutch and slave cylinder. If I didn't explain that good enough you can look up nut trick I believe in the search box for removing the clutch no hydraulic pressure. It may sound complicated it's actually very simple once you kind of figure out where the nuts need to go and then you tighten the pressure plate back down and those little nuts act like a spacer on the little arms that are all the way on the outside of the pressure plate. You'll have to do them one at a time going around and snugging them up just a little bit to hold the nut in place once you've gotten all three of them in place you can tighten all of the bolts down pushing the pressure plate back to the flywheel giving you enough room to install the ring and you should be able to remove everything after that. Hopefully I explained that good enough.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.