1985-1998 [Subscribe to Daily Digest] |
 | [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Stalling Saab 9000 Turbo Posted by nick [Email]  (#227) [Profile/Gallery]
(more from nick) on Wed, 3 Dec 2003 15:36:18
In Reply to: Stalling Saab 9000 Turbo, RedRocket, Wed, 3 Dec 2003 08:59:45 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Prolly a Bypass vavle. My 88 9kt turbo would dip at idle. To check the bypass valve, pull of the vacuum hose that is on the front "nipple" of the bypass valve. Pull the end off from the y connecter near the fire wall, just follow the hose from the front of the BPV to the back. Suck on this hose and if you get suction your BPV is good, if not then its bad.
Also, get some throttle body cleaner and clean the Throttle body/plate.
One more thing. The AIC valve. Its in front of the intake manifold it has an electrical connector on it and some (2?) vaccuum hoses. Pull this off and clean the inside with some throttle body cleaner or the like. Put everything back and you should be good to go..
One of those should take care of your problem.
goodluck, keep us posted
Nick
88 9kt
posted by 128.113.197...
, Wed, 3 Dec 2003 15:36:18 <-- Viewing This Message
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
