1985-1998 [Subscribe to Daily Digest] |
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
93 Aero not boosting to red any more Posted by dbreid [Email] (#1192) [Profile/Gallery] (more from dbreid) on Sun, 25 May 2008 18:04:04 Members do not see ads below this line. - Help Keep This Site Online - Signup |
All,
I posted about this a little while ago, but I have been narrowing down the issue, and I figure I'd post a more direct question.
My 93 Aero currently, under hard acceleration, will not get to the "red." The car idles perfectly, and unless I punch it, seems perfectly normal. But under hard acceleration, the car will not spool up all the way.
Here's what I have checked so far:
1.) I installed properly gapped NGK plugs in the car. There were NGK's in it, and they were gapped and not spent, but I figured it couldn't hurt.
2.) I pulled off the BPC valve (the one mounted to the radiator... people seem to call this thing different names?) and sprayed electrical cleaner in it and dried it out. I also tested it, and it gets between 2.7 and 3.0 between the center pin and the outer pins.
3.) I checked all the vaccuum lines I could find. I found something suspect and I sealed it, but that didn't do much.
It feels like the car is sensing knocking or something, and "stopping" the boost. I thought it might be bad gas, but I always fill up with the best gas I can find in CA, and I put in a fresh tank, and nothing changed.
I have also heard that the DI cassette might be the culprit? I read the Haynes, and it doesn't give much of a way to test it... I don't have any leaking in the cylinders, but maybe it is on its last legs?
Any ideas of other things to test?
Thanks, Dan
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.