1985-1998 [Subscribe to Daily Digest] |
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: TD04 turbo exhaust-housing-to-cartridge clamp Posted by 900 Aero [Email] (#425) [Profile/Gallery] (more from 900 Aero) on Mon, 20 Dec 2010 18:47:16 In Reply to: TD04 turbo exhaust-housing-to-cartridge clamp, weston, Mon, 20 Dec 2010 16:30:12 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Your TD04HL turbo has a 2mm dowel pin that clocks the turbine housing to the bearing housing! You can remove the v-band clamp and carefully separate the turbine housing from the bearing housing and remove the dowel pin and leave it out and then position the housing where you want it to be and re-tighten the band clamp! Just be real careful when you separate the housings so you don't run the exhaust housing into the turbine wheel! Besides damaging the turbine wheel enough side force can bend the turbine wheel's shaft! There's a stainless steel heat shield that is captured between the two that needs to stay with the bearing housing so make sure it goes back together centered up and watch out for any loose carbon deposits that have built up on the bearing housing side of the heat shield!
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.