Re: Steering column clamshell screws - Saab 9000 Bulletin Board - Saabnet.com
NG900 & OG93 |
Vintage Models |
Clubs & SOC |
Other Cars |
Member Photo Galleries |
Member Directory |
*Buddy Registry |
*Mileage Registry |
What's New |
Photo of the Month |
I'm not surprised. The indy also messed up the fitting that's closest to the ignition switch. That was many years ago, before the plastic bits became brittle.
I opened it up to check the cruise switch (it's good) and thought why not tighten the 13 mm bolt and nut at the telescoping mechanism to take the 1/4" of play out of the steering column. I made it so tight the lever wouldn't operate, but the play remained. So I loosened it until the lever became usable again. Oh well.
Posts in this Thread:
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Your address is: 220.127.116.11 - Using CCBot/2.0 (https://commoncrawl.org/faq/) - Logged.
Site Members do not see red text instructions, bottom of the page anchor ads, or box ads.
Click here to see all
the Site Membership Benefits!