1969-1984 [Subscribe to Daily Digest] |
 | [Main Saab Model 99 Bulletin Board | BBFAQ |
Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
points gap for injected engines is Posted by DougM [Email]  (#211)  [Profile/Gallery]
(more from DougM) on Sat, 16 Sep 2006 05:02:51
In Reply to: Re: 74 EMS wiring, Kevin, Sat, 16 Sep 2006 02:43:37 Members do not see ads below this line. - Help Keep This Site Online - Signup |
0.014" or 0.35mm and dwell is 50 plus or minus 2 degrees.
I've always set the points with a dwell meter. They aren't the easiest to set, so skipping the gap and moving directly to dwell gets them right the first time. In my experience, getting them close, then trying to "fine tune" by adjusting dwell rarely ever works out. You think you move them just a hair, but when cranking and setting dwell, it could throw them off the meter. It's very frustrating sometimes! They aren't uni-set points which allows you to set the correct angle while the car is running.
Did you by chance ohm out the coils? You should have between 1.7-2.1 ohms between terminals 1 and 15 of the coil.
posted by 70.39.32...
, Thu, 21 Sep 2006 02:25:36, Thu, 21 Sep 2006 02:29:51, Fri, 22 Sep 2006 05:19:59, Sat, 16 Sep 2006 05:02:51 <-- Viewing This Message, Sat, 16 Sep 2006 13:41:12, Sat, 16 Sep 2006 19:49:55, Sun, 17 Sep 2006 09:08:25, Fri, 15 Sep 2006 16:04:43
, Fri, 15 Sep 2006 11:17:54
, Fri, 15 Sep 2006 15:10:15
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
