1994-2002 [Subscribe to Daily Digest] |
| [Main NG900 & OG93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Thoughts on a mod to accelerate boost increase ... Posted by Craig [Email] (#3854) [Profile/Gallery]
(more from Craig) on Thu, 5 Oct 2000 11:45:49
|
I've got a 2000 9-3 2.0t, the 150bhp model. My question is, would increasing the air volume of the tubing from the turbo control valve to the wastegate actuator (either by adding more tube, or putting a small bulb or similar in the line) help boost to rise faster and enhance low-end, without increasing overall boost pressure?
A bleed valve could cause problems, and an ECU upgrade is too expensive, but my initial thought is that increasing the volume of the actuator air line will a) delay slightly the wastegate opening because more pressure will be needed and b) help give more pull in the 2K to 3K rpm range. Also, because no air is lost (as would be the case with a bleed valve), there should be no problems with loss, etc.
Anyone got any thoughts? Any and all contributions welcome.
, Thu, 5 Oct 2000 11:45:49 <-- Viewing This Message
, Fri, 6 Oct 2000 04:42:49
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |
