1994-2002 [Subscribe to Daily Digest] |
[Main NG900 & OG93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Low voltage wires on connector to Distributor Posted by crawdad [Email] (#1867) [Profile/Gallery] (more from crawdad) on Sun, 23 Aug 2020 12:27:27 In Reply to: Low voltage wires on connector to Distributor, Simon, Thu, 20 Aug 2020 18:36:50 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I don't have experience with this vehicle so I hope someone else will answer. I'm looking at the wiring diagram for the Motronic 2.10.2 and don't see "distributor" but I see the camshaft position sensor which is inside the distributor. From that, I see two black wires, one going to a connector which then goes to ground - G112 on the left side of the engine. The other black wire goes to the control module, terminal 13, inside the side trim below the A pillar on the right side. There's also a yellow wire going to the control module, terminal 9.
No idea on proper routing of the black wires.
->Posting last edited on Sun, 23 Aug 2020 13:36:24.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.