1994-2002 [Subscribe to Daily Digest] |
| [Main NG900 & OG93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
You need to torque the subframe....more Posted by Nickshu [Email] (#3765) [Profile/Gallery]
(more from Nickshu) on Tue, 20 Nov 2001 19:13:16
In Reply to: Front end suspension noise, James, Tue, 20 Nov 2001 15:20:51 Members see ZERO ads on the bulletin boards and get more feature. - Help Keep This Site Online - Signup |
This is most likely the subframe that the engine is mounted on sliding back and forth. Saab recommends torquing it every 60K miles. It comes slightly "loose" over time and shifts back and forth with the force of the engine and braking. This happened on both my 9000's which use an identical design for the subframe mounting.
Put the car up on ramps. Look underneath....there is a very obvious squarish frame which the engine and transmission mount to...it covers the entire undersurface of the front of the car. There are 2 bolts at each corner which secure the subframe to the unibody of the car.
Torque these and all similar bolts nearby to 45 ft. lbs. If you do not have a torque wrench....just make it "pretty tight", but I suggest using a torque wrench b/c I have seen these bolts stripped.
Hope this helps,
Nick.
95 900S
93 900S
91 9000CDT sold this summer
87 9000T deceased
86 9000T deceased
posted by 24.160.2...
, Tue, 20 Nov 2001 19:13:16 <-- Viewing This Message
, Wed, 21 Nov 2001 07:46:23
, Wed, 21 Nov 2001 19:26:58
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |
