[Subscribe to Daily Digest] |
[Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Water injection Posted by Jon [Email] (#11) [Profile/Gallery] (more from Jon) on Sat, 6 Nov 2004 19:01:55 In Reply to: Water injection question... longish..., Chaz, Sat, 6 Nov 2004 14:33:34 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Chaz,
I have the Aquamist Water Injection installed on my 89 SPG. I only have one jet and it is installed in the outlet of the stock intercooler. I use straight pre-mixed windshield washer fluid.
My installation is here:
http://www.nysoc.com/gallery/album67
Dyno sheets are here:
http://www.nysoc.com/gallery/album75 on page 2.
My car on the dyno is an 89 SPG with a group 9 performance 3” stainless steel exhaust, stage II APC, base boost is set to 6.5 psi, 3-bar fuel pressure regulator, drop in K&N air filter, Forge bypass valve, Aquamist Water Injection, silicone vacuum tubing, custom double rear sway bar, relocated rear axle, polyurethane bushing on the Koni shocks and poly bushings on the stock front sway bar, Bridgestone S03 Pole Position tires, 205-55-15 on stock SPG rims. The stock exhaust manifold has been ceramic coated and the “tab” has been ground away on the inside. There are no other performance modifications. The engine has stock pistons, fuel injectors, intercooler, turbo, etc.
Jon
Jon1..
posted by 69.169.21...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.