[Subscribe to Daily Digest] |
[Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
dont use the low impedance injs with out the volvo ECU Posted by jak [Email] (#195) [Profile/Gallery] (more from jak) on Sun, 7 Nov 2004 19:33:15 In Reply to: Good points..., Chaz, Sun, 7 Nov 2004 18:28:55 Members do not see ads below this line. - Help Keep This Site Online - Signup |
the reason is that there are 2 diferent typed os driver signal used to drive high & low impedance injectors lows use a peak & hold & highs run a saturated signal the low impedance injectors are slower with a saturated sigal & will run less flow :-(
so if you are gona run the volvo stuff get the 280 000 541 ECU the 280 212 007 AMM & the 280 150 357 31.5 lb hr injectors with the resister pack than corect the wiring for the volvo AMM & lace in the resister pack on the power side
Im gona do my next setup using the 280 150 009 33 lb hr injectors from a DIAPC 9K & go back to the saab ECU to drive the high impedance injectors but keep the volvo AMM I run Ill have coppies of this chip available so you might wait for that or let me know if I can ever be of help in any way no problem Im here :-)
you take care
JAK
posted by 68.119.228...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.