The Saab Network Now Mailing List FAQ
| |
|
[ Prev by Date ] [ Next by Date ] Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Any Alternative to Special Clutch Tool?
Posted by Barry E. Muller (more from Barry E. Muller) on Thu, 22 Jul 1999 23:07:56
First I would like to thank those who responded to my earlier post
regarding diagnosing the cluth problem in my '87 900S.
Further inspection seems to indicate a failure of the clutch master
cylinder. The slave may be bad too, but I won't know until I replace
the master cylinder (MC) and attempt to bleed the system. If I can't
bleed the system after replacing the MC, I will need to use the special
long-handeled saab tool to disengage the cluth so I can remove the whole
sheband to get at the slave cylinder. I got a quote of over $100 for
this tool, which, considering I hope only ever to do this job once, is a
bit too much for me.
So, is there any way to replace this 'special tool' with a modified pry
bar or the like?
Thanks,
bem
Posts in this Thread:
StateOfNine.com
 |
SaabClub.com
 |
Jak Stoll Performance
 |
M Car Covers
 |
Ad Available
 |
  
This is a moderated FAQ - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no Spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. TSN has been a moderated forum since 1988. For usage guidelines, see the
TSN Mission and Purpose Page. Please remember that you are
not anonymous
Your address is: 18.223.21.5 - Using Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) - Logged.
|
