1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: 1992 900S CV - need front body diagram Posted by Larry West [Email] (#1140) [Profile/Gallery] (more from Larry West) on Tue, 12 May 2009 05:59:24 In Reply to: Re: 1992 900S CV - need front body diagram, Todd inMA, Mon, 11 May 2009 18:38:50 Members do not see ads below this line. - Help Keep This Site Online - Signup |
The bumper is held on by the two bolts. They are accessed from underneath, and go up vertically. You will need an 8mm hex driver.
But, before you do that, there are at least two smaller screws holding the edges of the bumper cover to the bumper extensions. Also, as someone else mentioned, the grille attaches to the bumper by clipping into the top of the cover. Check all the way around the bumper cover and spoiler (which comes off with the bumper) for small screws holding the cover to anything else on the car.
If your car is equipped with headlamp wipers, some of them are mounted TO the bumper, and you'll have to disconnect the wires and hoses after the bumper is off.
_______________________________________ Current: 2002 9-5 Aero Kombi Cosmic Blue 2000 9-5 SE sedan, Imola Red 1990 900S Rose Quartz, Auto Past: 1999 9-5 LPT Combi 1999 9-5 LPT sedan 2002 9-5 Arc 1990 900 5-speed 1986 900 turbo Convertible 1991 9000 turbo 1980 99 GLi 1986 900 turbo 1986 900 S 1991 900 turbo 1984 900 turbo 1976 99 GL
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.