1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
motor goes under Vacuum Posted by vvack0matic [Email] (#1443) [Profile/Gallery] (more from vvack0matic) on Wed, 27 Jun 2012 16:30:37 In Reply to: Re: Tossed in a new gasket to no time at all, Justin VanAbrahams [Profile/Gallery] , Wed, 27 Jun 2012 12:23:47 Members do not see ads below this line. - Help Keep This Site Online - Signup |
By way of the boost tac. so if there was a leak it would have to be in the plumbing form turbo to intake. Not discounting the turbo itself. had the car out running and idling for more than a half an hour and no smoke out the tail pipe what so ever.
I had found papers in the trunk of the parts car receipts of piston rings and gasket set were bought, and there were spark plugs in the motor that were brand new never fired on. so I`m thinking the motor might have went through a major over haul put back in the parts car but never ran. Question is. if this is the scenario that has happened is it possible that the timing is off 1 tooth on the timing chain making the car run real rough at high rpms?
the motor idles smooth as silk I'm just shooting ideas out there to address the rough running at high rpms and whirling.
Ill check the turbo duct work for leaks tomorrow. I may have to lock down the wast-gate also it may be way out of adjustment,.. I`d never know
Oh and thanks again VanAbrahams I did the revers clutch bleed to get a little pedal,.. works every time :)
posted by 67.77....
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.