1985-1998 [Subscribe to Daily Digest] |
Here you go, hope that helps!
Inputs: (for 1995 model)
Voltage from +30 (pin 22)
2 Voltage from +15 (pin 7)
3 Ground (pin 1)
4 Cabin temperature sensor (pin 33)
5 Blended-air temperature sensor (pin 32)
6 Solar sensor (pin 6)
7 Parking heater (pin 3)
8 Rheostat (pin 31)
9 Outside temperature from Electronic Display Unit (EDU) (pin 18)
10 Diagnostics communication to the ISAT scan tool (pin 12)
Outputs:
Cabin temperature sensor, ground (pin 15).
2 Cabin temperature sensor, aspirating engine (+) (pin 16).
3 Blended-air temperature sensor, ground (pin 14).
4 Solar sensor, ground (pin 35).
5 Fan control module, control voltage (pin 20).
6 Fan control module, power supply (pin 17).
7 Air-mixing damper, stepping motor winding 1 (pin 27).
8 Air-mixing damper, stepping motor winding 1 (pin 28).
9 Air-mixing damper, stepping motor winding 2 (pin 29).
10 Air-mixing damper, stepping motor winding 2 (pin 30).
11 Air distributor, stepping motor winding 1 (pin 23).
12 Air distributor, stepping motor winding I (pin 24).
13 Air distributor, stepping motor winding 2 (pin 25).
14 Air distributor, stepping motor winding 2 (pin 26).
15 Recirculation damper, DC motor (pin 2).
16 Recirculation damper, DC motor (pin 21).
17 A/C compressor (pin 38).
18 Electrically heated rear window (pin 39).
19 Wake-up signal to Electronic Display Unit (EDU) (pin 4).
20 Solar sensor, supply voltage (pin 5).
21 Rear door fan, left-hand side (pin 9).
22 Rear door tan, right-hand side (pin 10).
23 Diagnostics communication to the ISAT scan tool (pin 12).
posted by 68.60.233...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.