2003-2011 [Subscribe to Daily Digest] |
[Main 93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: 2008 Aero V6 : intermittent no crank Posted by Bernie [Email] (#1501) [Profile/Gallery] (more from Bernie) on Sun, 8 Dec 2019 18:08:09 In Reply to: Re: 2008 Aero V6 : intermittent no crank, magalar [Profile/Gallery] , Sat, 7 Dec 2019 13:43:57 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Hello,
Ok so you have a bunch of bus communication codes mostly involving CIM and ESP. If you go to the page in the TECH 2 were you can read codes there is a BUS option that leads to a place were you can ping the various control modules on the Bus. I usually start there to see if a certain control module will not return any signal. If you look in WIS you can find the order/path through the control modules for the different buses. You will find that CIM is the gateway between the I-Bus and P-Bus. If your problem is a no start and you get it to act up you may be able to bypass the control module and see if it will start. I often do this with the ESP module because the car will start without the control module connected if you jump the wires at the harness connector. I will also note that I have had the UEC fail a few times by taking down the bus. Good Luck, Bernie
_______________________________________ George Riggin Specialty Automotive Current Saabs 1993 900 Turbo Conv. 1993 900 Turbo Conv. Auto 2003 9-3 Conv 2004 9-5 Arc Sedan 2005 9-3 SS 4 door 2005 9-3 SS Conv 2007 9-5 Aero Sedan 1986 900 Turbo Conv A few parts cars also
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.