In Reply to: or 175 whoops nm, vvack0matic [Profile/Gallery] , Thu, 26 Oct 2006 14:33:20

a amp.

and keep the deck at 4 ohms.

the problem is with 2 speakers on one channel the ohms goes to 2 or to 8
2 will blow the pre-amps and 8 the watts will be lost
the only thing you can do to keep it at 4 is to get more speakers
you know little ones round 40 watts a peace
your going to need to hook 4 speakers up on one channel
parallel one set of 2 and parallel the second set of 2
then run the power of the deck to the pos. of the first set run the neg of the first set to the pos of the second set, and run the neg. of the deck to the neg. of the second set.
bang 4 speakers at 4 ohms.

with this set up all speakers will have the watts of the channel
pre-amps will not over heat and the deck will be fine the speakers will give crystal clear sound at that. just get the oem 30 wat speakers
any thing more would be a wast of money.

posted by 68.56.23...

• Wiring for speakers..., EAB, Thu, 26 Oct 2006 07:36:29
  • Wow...not sure I got all that..., EAB, Fri, 27 Oct 2006 20:49:19
  • Re: Wiring for speakers..., vvack0matic , Thu, 26 Oct 2006 14:23:37
    • or 175 whoops nm, vvack0matic , Thu, 26 Oct 2006 14:33:20
      • looked at your next post and saw you don't want to buy, vack0matic, Thu, 26 Oct 2006 15:46:51 <-- Viewing This Message
  • Re: Wiring for speakers..., Randy House, Thu, 26 Oct 2006 07:59:05
  • Look at their impedance and imp. requirements (+), Siegfried, Thu, 26 Oct 2006 07:52:05
    • Re: Look at their impedance and imp. requirements (+), EAB, Thu, 26 Oct 2006 08:00:17
      • Re: Look at their impedance and imp. requirements (+), GM, Thu, 26 Oct 2006 09:34:38
        • Aren't you afraid of your ratings? (+), Siegfried, Thu, 26 Oct 2006 10:18:38
          • Re: Aren't you afraid of your ratings? (+), GM, Thu, 26 Oct 2006 11:56:21
            • Hice hardware :) (+), Siegfried, Thu, 26 Oct 2006 12:14:34
      • Man, I really advise you to ask some of your friends, Siegfried, Thu, 26 Oct 2006 09:30:41

No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.

• Prev by Date: brake not bleeding....89 900 non abs, dave, Thu, 26 Oct 2006 15:39:03
• Next by Date: want to upgrade 86 900T to 88+ hubs and breaks, Brian, Thu, 26 Oct 2006 15:55:17
• Main C900 Bulletin Board

StateOfNine.com

SaabClub.com

Jak Stoll Performance

M Car Covers

Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]

Random Saabnet.com Member Gallery Photos (Click Image)