1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Engine still starts and then stops. Posted by bikerdad [Email] (#1407) [Profile/Gallery] (more from bikerdad) on Tue, 19 Nov 2013 20:34:37 In Reply to: Re: Engine still starts and then stops., Justin VanAbrahams [Profile/Gallery] , Mon, 18 Nov 2013 11:05:02 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I have done more checks. I put a 10,000 ohm resistor(corresponds to about 10 degrees F) in the temperature sensor plug (the sensor checked at 3,000 ohms or about 58 F) and the engine started stronger and lasted about 2 seconds longer and then shut down like before. I tried it 4 times, same results.
I pulled the injectors and cranked the engine with them hooked up and they all sprayed well for as long as the engine was cranked. We cranked it for 15 seconds and they all sprayed the whole time.
I checked the AIC by unhooking the hose and watching it while the engine was started and the valve opened and closed. I put in my spare AIC and it performed the same way.
I need to test the AMM yet, maybe tomorrow.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.